How Do I Autoduplex - MINOLTA-QMS magicolor 2350 User Manual

Windows
1
In the printer driver (on the Paper tab, Layout tab, or Page Setup tab,
depending on your operating system) select Simplex or choose No or
None in the duplex option, then double-click OK.
2
In the application's print dialog box, select All.
3
Select and print the Odd-Numbered Pages.
4
Remove the media, flip it over blank face-side up and top of page toward
printer, and select and print the Even-Numbered Pages.
If you are manually duplexing letterhead in Tray 1, load the media
face-up with the letterhead first. If you are manually duplexing letter-
head in Tray 2, load the media face-up with the top toward the right.
Macintosh
You can duplex manually from a Macintosh from some applications that are
generally used for multi-page documents. This feature is controlled by the
application, rather than by the PPDs.
1
When you are ready to print, open the print dialog box by choosing the
Print option within the application you are using.
2
Find the even/odd page selection. For example, in Quark XPress, use the
Document/Page Sequence option.
3
Select and print the Odd-Numbered Pages.
4
Remove the media, flip it over blank face-side up and top of page toward
printer, and select and print the Even-Numbered Pages.
If you are manually duplexing letterhead in Tray 1, load the media
face-up with the letterhead first. If you are manually duplexing letter-
head in Tray 2, load the media face-up with the top toward the right.

How do I autoduplex?

To autoduplex, the duplexer must be physically installed on the printer and
identified as an installed option in the printer driver. Otherwise, the print job
will print as simplex even if you select duplex.
Windows—Use the printer driver to configure the printer for duplex printing.
1
In the printer driver's Settings tab, highlight Optional Duplexer in the Avail-
able Options box.
Duplexing
39