Too thin or too thick
Stuck together with static electricity
Composed of foil or gilt; too luminous
Heat sensitive or cannot withstand the fusing temperature (356° F/180° C)
Irregularly shaped (not rectangular or not cut at right angles)
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
Acidic
Any other media that is not approved
Plain Paper
Capacity
Orientation
Type
Driver Mode Plain paper
Weight
Duplexing
Envelopes
Your printer receives the instructions to print on envelopes from your
application. See your application documentation for specific information on
printing envelopes.
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these
layered regions may be lost or faded.
Capacity
Orientation
Media Types
Tray 1
200 sheets of 22 lb bond (80 g/m2) paper;
(multipurpose
capacity for other weights varies accordingly.
tray)
Tray 2
500 sheets of 22 lb bond (80 g/m2) paper
(optional lower
(letter/A4); capacity for other weights varies
feeder unit
accordingly.
media tray)
Face up
Check www.minolta-qms.com/support (click on Answer Base)
for currently approved media. To order approved media, go to
www.q-shop.com.
16–24 lb bond (60–90 g/m²)
See page 23 for supported sizes.
Tray 1
Up to 50 envelopes, depending on their thickness
Tray 2
Not supported
Face up
25