MINOLTA-QMS magicolor 2350 User Manual page 145

This message...
OPC DRUM LOW
OPC DRUM MISSING
OPC OUT
PAPER JAM
DUPLEX
PAPER JAM
EXIT
PAPER JAM
FUSER
PAPER JAM
TRANSFER
PAPER JAM
TRAY 1
PAPER JAM
TRAY 2
PAPER MISMATCH
PUT X
IN TRAY Y
REPLACE OPC
REPLACE OPC DRUM
Status, Error, and Service Messages
means...
The OPC drum will
need to be replaced
soon.
The OPC drum is not
installed.
The OPC drum needs
to be replaced.
Media has jammed in
the optional duplex
unit.
Media has jammed
between the print
engine and the output
tray.
Media has jammed in
the fuser unit.
Media has jammed in
the transfer area.
Media has jammed
while being pulled
from the multipurpose
tray.
Media has jammed
while being pulled
from the optional
lower feeder unit.
The paper size set
with the printer driver
is different from the
size of paper loaded.
The media tray "Y"
(specified tray) is out
of media. Load media
size and type "X."
The OPC drum needs
to be replaced.
The OPC drum needs
to be replaced.
do this...
Make sure you have a
new OPC drum on hand.
Install the OPC drum.
Replace OPC drum and
waste toner bottle.
Locate and remove the
jam.
Locate and remove the
jam.
Locate and remove the
jam.
Locate and remove the
jam.
Locate and remove the
jam.
Locate and remove the
jam.
Check paper size
settings; load correct
size.
Load more media.
Replace OPC drum and
waste toner bottle.
Replace OPC drum and
waste toner bottle.
143