MINOLTA-QMS magicolor 2350 User Manual page 135

Symptom
Language
choices
appear
wrong in
PageScope
Light.
Your print job
is not aligned
properly on a
custom-sizep
age.
Media is
wrinkled.
Multi-paged,
legal-sized
color
documents
print slowly.
Print Errors
occur when
printing PCL
files.
Errors occur
when printing
PDF files.
Solving Other Problems
Cause
The Katakana
characters required
for the last language
choice are not
available in your
system fonts.
You are using an old
version of NetScape
or Internet Explorer.
Custom media size
doesn't match the
size identified in the
printer.
The media is moist
from humidity or
having water spilled
on the paper supply.
The transfer roller or
fuser unit may be
defective.
Unsupported media is
being used.
The printer is not
correctly optimized.
Solution
The default font needs to be set for MS
Gothic.
Make sure you are using Netscape 6.0
or later or Internet Explorer 5.0 or
newer.
Check that the Input Tray is set to
Custom at the control panel and that
the exact dimensions are entered in the
control panel menu, PageScope Light,
or the printer driver.
Remove the moist media and replace it
with new, dry media.
Check them for damage. If necessary,
contact Technical Support with the error
information. Refer to the Service &
Support Guide or
www.minolta-qms.com for support
telephone numbers.
Use MINOLTA-QMS-approved
media. Refer to chapter 2 for details.
Check www.minolta-qms.com/products/
for currently approved media.
In the System Default/Startup Options/
Optimize Media menu, choose For
Legal.
In the System Default/Startup Options/
Optimize PDL menu, choose For PCL.
In the System Default/Startup Options/
Optimize PDL menu, choose For PDF.
133