Macintosh Os X-Ppds And Utilities Installation - MINOLTA-QMS magicolor 2350 User Manual

Macintosh OS X—PPDs and Utilities Installation
OS X Step 1. Software Installation—Automatic
a
Insert the Software Utilities CD-ROM in your Macintosh's CD-ROM
drive.
If this screen does not appear,
double-click the
MINOLTA-QMS CD-ROM icon
on your Macintosh desktop.
b
Double-click the install icon.
c
Follow the instructions on the screen to install the magicolor 2350
PPD and utilities.
d
After the PPD and utilities installation is complete, choose Quit.
OS X Alternate Step 1. Software Installation—Manual
Manual installation instructions are included in the magicolor 2350 Reference
Guide. Refer to Section 2, "Installing Printer Software, Drivers, and PPDs" for
complete instructions.
OS X Step 2. Creating a Printer Queue
a
Connect the printer to the computer using a USB or Ethernet
connection.
For USB, plug one end of the USB cable into the PC and the other into
the matching printer port.
For Ethernet, you can connect in either of two ways:
Plug one end of a crossover Ethernet cable into the Macintosh and
the other into the printer's Ethernet port.
Use Ethernet patch cables and an Ethernet hub. Plug one end of
each patch cable into the hub, then plug the other end of one into
the Macintosh and the other end of the second into the printer's
Ethernet port.
Installing Printer Drivers and Utilities, Macintosh
The installer uses the
path Hard Disk Name/
Library/Printers/ PPDs/
Contents/Resources/
for PPDs and the path: Hard Disk Name/Library/Fonts/ for
fonts.
17