Setting Up And Using The Emap - Avermedia AVerDiGi EH5116 Pro User Manual

Name Function
(15) Full screen
(16) Alarm
(17) Virtual
Keyboard

2.2.1 Setting Up and Using the Emap

E-Map can hold up to 8 maps in *.jpg format. You may locate the camera, sensor and relay on the
map.
To Set Up the Emap
1. Click Emap.
2. When the Emap screen appears, click the
area number (1 to 8 buttons) on where you
want to insert the map.
3.
Click Load Map to insert the map. When
the open dialog box appears, locate and
select the map and click Open.
4. When the inserted map appears on the
Emap screen, click Edit. You may now
drag the camera, sensor, and relay icons
to its place on the map. Icons on the map
can be relocated anywhere. If you are
going to locate the icon on the map to
other area, you need to drag the icon to
the black pane at the bottom of the Emap
screen and then switch to the area on
where you want to locate the icon. To bring all the icons back to the black pane at the bottom of
the Emap screen, click Reset Icon.
5. When you are done, click Save button to save the new setting. To exit Emap screen, click
Close.
To Use the Emap
1. Click E-map.
2. In the Emap screen, click the camera icon to switch on the area where the camera is located on
the map and to display the video at the upper right corner of the Emap screen. At the lower right
corner of the Emap screen, it lists all the warning message.
View in full screen. To return, press the right button of the mouse or ESC on the
keyboard or click the arrow icon.
When you switch to full screen in multiple-screen mode, Left click to toggle to
only display one of the video in the multiple-screen mode or all.
Alert and display warning info.
Click to enable virtual keyboard.
20
Click to exit from
full screen mode