Table of Contents
Advertisement
(5) Advanced
2.5
Familiarizing the Buttons in PTZ Camera Controller
(5)
(6)
Name
(1) Close
(2) AutoPan
(3) Focus +/-
(4) Zoom +/-
(5) Direction buttons
(6) Camera ID pane
(7) Save Camera
preset position
(8) Camera lens
speed controller
(9) Camera preset
position number
(10) Group AutoPan
2.6
Setting Up and Using the Emap
E-Map can hold up to 8 maps in *.bmp/*.jpg format. You may locate the camera, sensor and
relay on the map.
2.6.1
To Set Up the Emap
1.
Click Emap.
2.
When the Emap screen appears, click the area number (1 to 8 buttons) on where you
want to insert the map.
3.
Click Load Map to insert the map. When the open dialog box appears, locate and
select the map and click Open.
1. When the inserted map appears on the Emap screen, click Edit. You may now drag the
Switch to Preview/Advanced mode.
(7)
(8)
Function
Exit PTZ camera controller.
Operate the PTZ cameras automatically based on the selected
camera group preset position number.
Adjust the focus manually to produce clear image.
Zoom in and out the image.
Adjust and position the focal point of the PTZ camera.
Display the PTZ camera number that is being operated.
Save the PTZ camera preset position number. Select the camera
and click the preset position number and save it.
Adjust the moving speed of the PTZ camera lens.
Move the PTZ camera to the preset point.
Select to automatically operate PTZ camera in group.
(4)
(3)
(2)
(9)
12
(1)
(10)
Advertisement
Table of Contents
