Table of Contents
Advertisement
Automatically log in to the selected default user when the DVR is executed.
(12) Date and Time Setting
Adjust the DVR system time and date. Click Setting to select the month, date, hour, and minute.
Mark Daylight saving check box to enable daylight saving function. And then, select the Start and
End Date/Time by click Setting.
Daylight Bias: Assign a time that it is for daylight saving time offset in your time zone. For example:
if the time zone is in U.S. Eastern, the time offset is 1 hour.
(13) Firmware
Product Version Update: Upgrading the firmware of DVR system.
Click Update button, a Firmware Upgrade windows will show up.
1.
Save the firmware on root directory of USB disk. And then, plug USB disk into DVR
2.
unit.
Select the USB disk if there is more than one USB disk from drop down list. The DVR
3.
unit will auto detects the firmware.
Click OK to start upgrading.
4.
IPCam Module Firmware Update: Update firmware of IP camera.
Click Update button, a Firmware Upgrade windows will show up.
1.
Save the firmware on root directory of USB disk. And then, plug USB disk into DVR
2.
unit.
Select the USB disk if there is more than one USB disk from drop down list. The DVR
3.
unit will auto detects the firmware.
Click OK to start upgrading.
4.
32
Advertisement
Table of Contents
