To Cut And Save The Wanted Portion Of The Recorded Video - Avermedia AVerDiGi EH5116 Pro User Manual

Name
(5) Playback Control
Buttons
(6) Date
The numbers from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16
i
represent the camera ID. While the red colored column indicates on where to start playing the
recorded video file. If there is no any video data, it will be no color bar on top of the date button.
(7) Preview
(8) Playback
(9) Status bar
(10) Camera ID
(11) Export
(12) Segment
(13) Full screen
(14) Event Log
(15) Visual Search
(16) Find Next
(17) Intelligent Search
(18) Audio
(19) De-interlace
7.4.1.1

To Cut and Save the Wanted Portion of the Recorded Video

1. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on
where you want to start the cut. Then, click Segment to set the begin mark.
2. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on
where you want to end the cut. Then, click Segment to set the end mark. To cancel
segmentation or set the segment marks from the start, click Segment button again.
Function
Begin: Move at the beginning of the recorded video file.
Previous: Go back to the previous frame.
Slower: Play the recorded video file at the speed of 1/2x, 1/4x, or 1/8x.
Rewind: Wind back the video file.
Pause: Briefly stop playing the recorded video file.
Play: Play the recorded video file.
Faster: Play the recorded video file at the speed of 2x, 4x, 8x, 16x or 32x.
Next: Go to the next frame.
End: Go to the end of the video file.
Select the date on the calendar and the time from 00 to 23 to where to start
playing the recorded video file.
Switch to Preview mode.
Switch to Playback mode. This allows you to view the recorded video file.
Display the record date, time, HDD capacity in preview mode and play speed
in playback mode.
Show the number of cameras that are being viewed. When you are in single
screen mode, click the camera ID number to switch and view other camera.
Export includes Snapshot, Print, and Output Video Clip function.
Snapshot: Capture and save the screen shot either in *.jpg format.
Print: Print the screen shot.
Output Video Clip: Save the segmented file in *.dvr format (see also
Chapter 7.4.1.1).
Keep a portion of the recorded video you want (see also
View in Playback-compact mode. To return, press the right button of the mouse
or ESC on the keyboard.
Show the record of activities that take place in the system
Search from a specific camera by Date, Hour, Minute, 10 Seconds and
Second(also see Chapter
Search for the next event. You can use this when you are using Event Search
function.
Search the changes in the motion detector frame (See also
Enable/disable volume
To enhance the video quality. Set the de-interlace mode to #1, if you are
capturing motionless picture and #2, if it captures lots of movement.
2.3.3)
94
Chapter 7.4.1.1).
Chapter 3.6.4).