Table of Contents
Advertisement
2.2
Familiarizing the Buttons in Preview Mode
Name
(1)
Exit
(2)
Split Screen
Mode
–
i
When you are in single screen mode, Right click and Drag a square on the area you want to
enlarge.
–
When you are in full screen mode, partial enlarges does not support.
(3)
Record
(4)
EMap
(5)
Network
(6)
Setup
(7)
PTZ
(8)
Preview
(9)
Playback
(10) Status bar
(11) Camera ID
(12) Snapshot
(13) Event log
(14) AutoScan
Function
Reboot: To restart the DVR system. It is required to enter the password
Power Off: To shut down the DVR system. It is required to enter the password
Login: Using different ID to login to DVR system.
Cancel: To return to DVR application.
Select from 6 different split screen types to view all the camera, or one camera
over the other or alongside on a single screen. It also allows you to switch and
view different camera number.
Start/stop video recording.
Display the map in each area, and the location of camera/ sensor/ relay and the
warning (see also
Chapter
Enable/disable remote system access. This feature allows you to access DVR
server from a remote location via internet connection. The default is disableed.
Configure the system settings. (see also
Access PTZ control panel. (see also
Switch to Preview mode. This allows you to view live camera display.
Switch to Playback mode. This allows you to view the recorded video file. (see
also
Chapter
2.3)
Display the recorded date, time, hard disk space and temperature of unit.
Show the number of cameras that are being viewed. When you are in single
screen mode, click the camera ID number to switch and view other camera.
Capture and save the screen shot in *.jpg format.
Show the record of activities that take place in the system. (see also
2.2.3)
Start/Stop video screen cycle switch.
2.2.1).
Chapter
3)
Chapter
2.2.2)
19
Chapter
Advertisement
Table of Contents
