Table of Contents
Advertisement
2.
In the POS Mapping dialog box, click OK to accept the settings and Cancel to exit without
saving the new setting.
(1) Name: Enter a name to identify the POS.
(2) Protocol: Select the protocol.
(3) Skip first: Set the number of lines you want to be removed.
(4) Font Color: Select the text color of the POS data.
(5) Port Setting : Select the Local(Com port) where it is connected and Baud Rate.
(6) Map to Channel: Select to which camera number to display the transaction text.
(7) Text Filter: Enter the word you want to be removed.
(10) Miscellaneous
Playback mode: Select the mode of playback the video.
–
Select date and time: Select the date and time which user wants to playback.
–
Play the last file: Automatically playback the video from the last hour
–
Instant Playback: Automatically playback the video which has just recorded
Date Format
Select the date format which wants to display in select date and time playback mode
Auto Scan Period
Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically
switches to the next video in cycle depending on the set time gap.
(11) Login
Enable the conditions in Login section you want the system to automatically carry out.
- Auto Login after system boot up
Execute the DVR when the operating system is started.
- Auto Record after system boot up
Automatically start video recording when the DVR is executed.
- Auto start Network after system boot up
Automatically start network connection when the DVR is executed.
- Default user
31
Advertisement
Table of Contents
