3. Click Close to exit Emap screen.
2.2.2 Familiarizing the Buttons in PTZ Camera Controller
(6)
(7)
(8)
Name
(1) Close
(2) Setup
(3) AutoPan
(4) Focus +/-
(5) Zoom +/-
(6) Direction buttons
(7) Camera ID pane
(8) Save Camera
preset position
(9) Camera lens
speed controller
(10) Camera preset
position number
(11) Group AutoPan
(9)
Function
Exit PTZ camera controller.
Configure PTZ cameras(see also
Operate the PTZ cameras automatically based on the selected camera group
preset position number.
Adjust the focus manually to produce clear image.
Zoom in and out the image.
Adjust and position the focal point of the PTZ camera.
Display the PTZ camera number that is being operated.
Save the PTZ camera preset position number. Select the camera and click the
preset position number and save it.
Adjust the moving speed of the PTZ camera lens.
Move the PTZ camera to the preset point.
Select to automatically operate PTZ camera in group.
(5)
(4)
(3)
(10)
Chapter
2.2.2.1)
21
(2)
(1)
(11)