Table of Contents
Advertisement
- Relay Output
Set to enable/disable the relay operation when the
alarm is activated and to extend additional time in
second before it stops the relay operation.
1. Beside the Relay Output check box, click
Detail.
2. In the Alarm Relay dialog box, select from the
available relay list and in the ON column, set
to enable/disable the relay operation when the
alarm is activated.
3. In the Retrieve time check box, you may
enable/disable to extend the relay operation
time and set the duration in second.
4. Click OK to exit and accept the setting and
Cancel to exit without saving the setting.
- IP Camera Relay
Set to enable/disable the relay operation when the alarm is activated.
- Play Warning Sound
Play alarm sound.
- Send E-mail
Send an electronic text message. Beside the Send Email check box, click Detail.
In the E-mail Setting dialog box, click OK to exit and save the setting and Cancel to exit
without saving the setting.
(1)
(2)
(1) Mail Server
Enter the SMTP Server and port. If your e-mail system requires user identification, enable
Authentication check box and enter ID and Password.
(2) Mail
Fill the mailing information.
From: Enter the sender e-mail address.
To and CC: Enter the recipient email address and separate it with comma or a semicolon
(;).
56
Advertisement
Table of Contents
