Table of Contents
Advertisement
7.2
Familiarizing the Buttons in WebViewer PTZ
Name
(1) Direction buttons
(2) Zoom +/-
(3) Select PTZ
(4) Focus +/-
(5) AutoPan Groups
(6) Camera preset
position number
Function
Adjust and position the focal point of the PTZ camera. Click the center to pan
automatically.
Zoom in and out the image.
Choose to enable/disable the PTZ camera. In the Select PTZ dialog box, Select
column, click to enable/disable viewing and controlling the PTZ camera.
Click OK to exit and save the setting and Cancel to exit without saving the
setting.
Adjust the focus manually to produce clear image.
Operate the PTZ cameras automatically based on the selected camera group
preset position number.
Move the PTZ camera to the preset point. The reset point (1~9) is based on the
user has setup by remote control at local site.
88
(1)
(2)
(3)
(4)
(5)
(6)
Advertisement
Table of Contents
