Familiarizing The Buttons In Ptz Camera Controller; Setting Up And Using The Emap - Avermedia NV 3000 User Manual

4.6

Familiarizing the Buttons in PTZ Camera Controller

(see also chapter
Name
(1) Close
(2) Setup
(3) AutoPan
(4) Focus +/-
(5) Zoom +/-
(6) Direction buttons
(7) Camera ID pane
(8) Save Camera
preset position
(9) Camera lens
speed controller
(10) Camera preset
position number
(11) Group AutoPan
4.7

Setting Up and Using the Emap

E-Map can hold up to 8 maps in *.bmp/*.jpg format. You may locate the camera, sensor and
relay on the map.
To Set Up the Emap
1. Click Emap.
2. When the Emap screen appears, click the area number (1 to 8 buttons) on where you
want to insert the map.
3. Click Load Map to insert the map. When the open dialog box appears, locate and select
the map and click Open.
4.13)
Function
Exit PTZ camera controller.
Configure PTZ cameras.(also see
Operate the PTZ cameras automatically based on the selected
camera group preset position number.
Adjust the focus manually to produce clear image.
Zoom in and out the image.
Adjust and position the focal point of the PTZ camera.
Display the PTZ camera number that is being operated.
Save the PTZ camera preset position number. Select the camera
and click the preset position number and save it.
Adjust the moving s1peed of the PTZ camera lens.
Move the PTZ camera to the preset point.
Select to automatically operate PTZ camera in group.
Chapter
45
4.13)