Table of Contents
Advertisement
2.2.2.1 Setup the PTZ Camera
1. In the PTZ control panel, click Setup.
2.
When the PTZ Setup dialog box appears, select the camera number and check the Use PTZ
box.
3. In the Connection Settings section, fill in the following selections. Then, click Save to keep the
settings.
-
COMPort: The port that the PTZ camera is connected
-
ID: PTZ camera ID number
-
Baud Rate: Please refer to the user's manual of the PTZ camera to make sure the baud
rate.
-
Protocol: Please refer to the user's manual of the PTZ camera to make sure what protocol
is using.
4. In the Preset Setting section, use the control panel to adjust the position of the PTZ camera
and select the preset number to assign a number for the PTZ camera current position. Set the
DwellTime (1-60 sec) for how long the PTZ camera stays in that position before it moves to the
next one. If you want to add description, check the Show Preset Name box and in the Preset
Name text box, type the word. After is done, click Save to keep the Preset Setting settings.
5. Repeat step 4 and 5, if you want to save another PTZ camera position.
6. Restore AutoPan Time: set a time period for restoring auto path function after the PTZ camera
has been moved manually. Mark the check box and set the time period in second.
7. After finished all configurations, click OK to exit. Click Cancel will exit and without saving the
settings.
22
Use to adjust
the lens of PTZ
camera for
preset position
setting.
Advertisement
Table of Contents
