Table of Contents
Advertisement
3. Click OK to complete adding remote DVR server.
4. The added DVR server will be listed and auto connects to DVR server.
5. Once the connecting is success, user can start to configure DVR server.
6. When connection is lost, click Reconnect to connect again.
7. To modify or delete the added DVR server, select the DVR server from listing and click Modify to
change the setting and click Delete to remove the DVR server.
8.
User also can import the setting by clicking Import button. To save the setting to local hard disk,
click Export button.
9.2.2 To Setup Remote System Setting
The setting here applies to Remote DVR only.
9.2.2.1 System Setting
In the System Setting windows, click Update to accept the new settings, click Exit to exit without
saving, and click Default to revert back to original factory setting.
(1)
(2)
(3)
(1) Delete recorded data after
If you want the system to automatically erase the data after a certain days, enable the Delete
recorded data after check box and enter the numbers of days in Days text box.
(2) Delete event and alarm log after
If you want the system to automatically erase the event and alarm log files after a certain days,
enable the Delete event and alarm log after check box and enter the numbers of days in Days text
box.
(3) Overwrite Enable
107
(4)
(5)
Advertisement
Table of Contents
