Table of Contents
Advertisement
4.4 Setup Wizard
When the first time you power on the capture box unit, the setup wizard appears. The following steps
will guide you through the initial configuration process.
Make sure to install a hard drive (internal or external) and to connect to the internet beforehand.
For the first-time initialization, a short duration of black screen (approximately 20 seconds) is followed by
AVerMedia logo. The blinking green status light indicates that the capture box is starting up. Please wait
until the welcome screen appears.
Step 1
Setting up Language
When the welcome page appears, use ▲/▼ to
select your preferred language. Press OK to
confirm.
Step 2
A/V Pass Thru.
It is suggested that A/V Pass Through to be turned
ON.
English – 15
Advertisement
Table of Contents
