Table of Contents
Advertisement
- Motion Recording
Start recording the video from the selected camera only when the system detects movement.
Once a motion is detected, the system automatically saves the previous frames and stop based
on the Start Record Prior and Stop Record After settings.
-
Smart Recording
Automatically switch to recorded at the maximum frame rate setting once a motion is detected
and if there is no motion, it records at the minimum frame rate setting.
- No Recording
The system won't do any recording.
(3) Motion Detection
Adjust the sensitivity of the motion detection. The higher the value, the finer the sensitivity is
detected. When it detects a motion, a green triangle mark would appear at the upper left corner of
the screen.
(4) Quality
Adjust the video quality. The higher the value, the lower the compression level and uses more hard
disk space.
(5) Frame Rate
Set the maximum and minimum number of frames to be recorded during motion and motionless
state. The frame rate ranges from 01 to 30 for NTSC and 01 to 25 for PAL. The higher the frame
rate, it uses more hard disk space.
i
Always recoding frame rate is depending on max frame rate value.
(6) Video Size
Select the size of the video and click the
(7) Individual Adjustment
Each camera can adjust video size and frame rate individually. Click Default will back to the factory
default value. The frame rate usage is shown in Used and Unused columns by CIF mode.
i
Only analog camera can adjust video size and frame rate by channel.
button. The higher the size, the larger the file it create.
81
Advertisement
Table of Contents
