Table of Contents
Advertisement
- Relay Output
Set to enable/disable the relay operation when the alarm is
activated and to extend additional time in second before it
stops the relay operation.
5. Beside the Relay Output check box, click Detail.
6. In the Alarm Relay dialog box, select from the available
relay list and in the ON column, set to enable/disable
the relay operation when the alarm is activated.
7. In the Retrieve time check box, you may enable/disable
to extend the relay operation time and set the duration
in second.
8. Click OK to exit and accept the setting and Cancel to
exit without saving the setting.
- Send E-mail
Send an electronic text message. Beside the Send Email check box, click Detail.
In the E-mail Setting dialog box, click OK to exit and save the setting and Cancel to exit
without saving the setting.
(1)
(2)
(1) Mail Server
Enter the SMTP Server and port. If your e-mail system requires user identification, enable
Authentication check box and enter ID and Password.
(2) Mail
Fill the mailing information.
From: Enter the sender e-mail address.
To and CC: Enter the recipient email address and separate it with comma or a semicolon
(;).
Subject: Enter the message title.
Message: Type the message.
86
Advertisement
Table of Contents
