Table of Contents
Advertisement
IP Setting: Click IP setting to add the IP camera.
Click the radio button of Protocol to start setup IP camera.
1.
Select the Protocol, Model, Video Format, and Channel of the IP camera.
2.
Enter IP address and connecting port in IP Camera Site column.
3.
Also, user can enter URL of IP camera instead of IP address.
4.
If the IP camera has authority request, please enable Authentication and enter ID and
5.
Password.
Click OK to connect with the IP camera.
6.
Detail: To adjust IP camera parameters, click Detail. Click Default will back to the factory
default value.
User can select Video size, Frame rate, Bitrate mode and Quality of camera. Also, user can
adjust Bright, Contrast, Hue, Saturation, and I/O Control of the camera.
i
The selection and adjustment items may vary by the camera supported.
I/O Control: Setup the sensor and relay that is embedded on the IP camera.
Sensor Setting
1. Click Sensor button.
34
Advertisement
Table of Contents
