Avermedia AVerDiGi EH5116 Pro User Manual page 49

host addresses. Enter the subnet mask of the IP address which user has assigned to DVR
system.
Gateway: A network device acts as a passageway to internet. Enter the network gateway IP
-
address
DNS: Domain Name Server translates domain names (such as www.abb.com.tw) to IP
-
addresses. Enter the IP address of DNS if it is available.
- MAC Address: An identifier hardware address of DVR unit that is assigned by the
manufacturer for identification. User don't need to fill in, it will generated by system
automatically.
Obtain an IP automatically (DHCP): Assign the IP address by local DHCP server to DVR
system.
PPPOE: Point-to-Point Protocol over Ethernet is a network protocol for encapsulating PPP
frames in Ethernet frames. It is used mainly with ADSL services. If your network is using ADSL
service connecting to internet, and then, select PPPOE mode. Enter User ID and Password
that is given by your ISP for PPPOE connecting authority.
DDNS: DDNS(Dynamic Domain Name Service) is a data query service mainly used on the
Internet for translating domain names into Internet addresses. Users can register their own
domain name on http://ddns.avers.com.tw. (See
- Domain Name
Enter the domain name that user has registered.
- Password
A password use to access DDNS that user has setup when register the domain name
- DDNS Server Name
Select your DDNS server. The default only has one DDNS server now. It may provide more
DDNS in future.
- DDNS Server Port
Fill in the port that connects to DDNS server. Default is 1053.
(4) Remote Upgrade Configuration
A port is using for the remote firmware upgrade through network.
(5) WebViewer Configuration
Activate Enable Anonymous Login to remotely access the DVR server without the need of
password. Fill in the WebViewer PORT for remote accessing connection.
(6) Network Time Synchronization
Adjust the DVR system time same as network time server. Fill in the Time Server IP address or
domain name and select the Time Zone. User can enable Automatic Synchronize at to set
automatic synchronize time on a daily basis. Or, user can click Synchronize Time Right Now to
adjust time right away.
(7) Other Configuration
- Enable White List
An access permit list for the remote accessing of DVR server. Enter the IP address and click
Add. Or, enter a range of IP address and click Add. To delete the IP from the list, select the
IP and click Delete button. To reset the input, click Clear button.
Appendix A)
43