Setting Up The Dvr Unit; Installing The Hard Disk - Avermedia AVerDiGi EB1704HB User Manual

1.5

Setting Up the DVR Unit

1.5.1 Installing the Hard Disk

The DVR unit allows user to install one hard disk. Before installing the hard disk, make sure
to set the hard disk master jumper setting. Adjust the jumper setting according to the
instructions on the hard disk label.
For hard disk spec, please referring to
-
i
http://www.avermedia.com/nvd/hardware-recom_eb.asp
EB1704HB WiFi only supports SATA hard disk.
-
The "compatible hard disks" indicated in the above recommendation list only means
that these commercially available hard disks were tested with AVerMedia
and functioned well under normal operation conditions. AVerMedia
guarantee or provide warranties, explicitly, implied or statutory with respect to the
reliability of the hard disk function or its compatibility. In no event AVerMedia
liable for damages, with respect to any business interruption of clients, lost profits, loss
of programs or other data on your information handling system or otherwise. This
includes direct, indirect, incidental, special, or consequential damages, resulting from
the incompatibility caused by the usage of these hard disks, even if AVerMedia
expressly advised about the risk of such damages. The entire risk arising out of the use
of any information attached here with is borne by the recipient.
Follow the illustrated instructions below to install the hard disk:
1. Unlock the removable hard disk drawer
3. And then, pull out the removable hard disk
drawer
2. Open the removable hard disk drawer
4. Remove the removable hard disk drawer cover
5
®
products
®
does not
®
shall be
®
has