Table of Contents
Advertisement
3.4
Network Setup
Click Default will back to the factory default value.
(1)
(2)
(3)
(4)
(1) Server Name
Assign a name for the DVR unit. Alphabet letters and numbers only.
(2) Transmitting Cameras
Select and click on the camera number in the Transmitting Camera section you want to make it
accessible via internet using WebViewer, Remote Console, PDA Viewer and JAVAViewer (still
image). To select all the cameras, enable the ALL check box.
(3) Main Configuration
Set the DVR IP address and Remote Console Port. You need this when accessing DVR server
from the remote location via internet. Click Setting to setup DVR IP.
Using the following IP address: Assigns an IP address for the DVR system. Fill in the IP
related parameters in IP information section.
-
IP: Assign a constant IP address which a real IP address gives from ISP to DVR system.
-
Mask: It is a bitmask used to identify the sub network and how many bits provide room for
42
(5)
(6)
(7)
Advertisement
Table of Contents
