Avermedia AVerDiGi EB3004 NET User Manual
  1. Manuals
  2. Brands
  3. Avermedia Manuals
  4. DVR
  5. AVerDiGi EB3004 NET+
  6. User manual

Avermedia AVerDiGi EB3004 NET User Manual

Hide thumbs Also See for AVerDiGi EB3004 NET:
Table of Contents

Advertisement

Quick Links

®
AVerMedia
AVerDiGi
EB3004 NET
+
EB3004 NET
User Manual
Dec. 2009

Advertisement

Table of Contents
loading

Related Manuals for Avermedia AVerDiGi EB3004 NET

Summary of Contents for Avermedia AVerDiGi EB3004 NET

  • Page 1 ® AVerMedia AVerDiGi EB3004 NET EB3004 NET User Manual Dec. 2009...
  • Page 2 In no event will AVerMedia be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages.
  • Page 3 WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR INAPPROPRIATE ITEM IN THE PACKAGE, PLEASE CONTACT WITH YOUR LOCAL DEALER. WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT MODIFICATION NOTICE - INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

  • Page 4: Table Of Contents

    Table of Contents Chapter 1 Introduction ................... 1 1.1  Package Content ........................1  1.2  Front Panel ..........................1  1.2.1  EB3004 NET ........................1  1.2.2  EB3004 NET ........................2  1.3  Back Panel ..........................3  1.4  Setting Up the DVR Unit ......................4  1.4.1 ...
  • Page 5 8.1  Familiarizing the WebViewer Buttons ................... 53  8.1.1  To Setup Remote System Setting ..................55  8.1.1.1  System Setup ....................... 55  8.1.1.2  Camera Setup ....................... 56  8.1.1.3  Record Setup ........................ 58  8.1.1.4  Alarm Setup ........................60  8.1.1.5  Network Setup ......................62  8.1.1.6 ...

  • Page 6: Chapter 1 Introduction

    INTRODUCTION CHAPTER Package Content (1) DVR unit a. EB3004 NET unit b. EB3004 NET (2) Remote Control (batteries included) (3) Quick User Guide (4) Software CD (User Manual included) (5) Power Cord * The power cord varies depending on the standard power outlet of the country where it is sold. (6) Power Adapter (7) Internal HDD holder (8 screws are included) 1.2 Front Panel...

  • Page 7: Eb3004 Net

    1.2.2 EB3004 NET Name Function Light when the unit is power on (1) DVR Power LED Indicate the hard disk running state. Light when the HDD is running (Read/Write) (2) HDD LED (3) IR Sensor Receive signal from the remote control to operate the unit (4) IR Sensor Port To connect extended IR sensor cable (5) USB Mouse Port...

  • Page 8: Back Panel

    Back Panel Name Function (1) LAN port For Ethernet connection. (2) CH1/CH2/CH3/CH4 Input the video camera signal and display it on channel 1/2/3/4 (3) TV Out Output the video signal to other video output device through BNC port When only connect one output device, please must set TV-VGA output order to MAIN-MAIN in DISPLAY SETUP (see also VGA-TV SELECTION Chapter...

  • Page 9: Setting Up The Dvr Unit

    AVerMedia does not guarantee or provide warranties, explicitly, implied or statutory with respect to the reliability of the hard disk function or its compatibility. In no event AVerMedia shall be liable for damages, with respect to any business interruption of clients, lost profits, loss of programs or other data on your information handling system or otherwise.
  • Page 10 Secure the hard disk inside the unit then place unit Push the cover forward and secure the cover cover You may now connect all the cables. When the power is connected, the Power LED light turns on...

  • Page 11: Connecting Devices

    1.4.2 Connecting Devices The back panel of the DVR unit, user can connect up to 4 video cameras, 4 sensor devices, 1 alarm device and output video to a TV or CRT/LCD monitor. Also, the DVR unit supports 4 audio input devices and 1 audio output device.

  • Page 12: Connecting The Audio, Sensor And Relay Device

    1.4.3 Connecting the Audio, Sensor and Relay device The Sensor, Alarm, and audio port enable you to connect 4 sensor inputs, 1 relay outputs, 4 audio in devices and 1 audio out device. Just connect the external sensor, relay, and audio in/out device pin directly to the pinhole.
  • Page 13 RS-485 Pin Definition When connect PTZ camera through RS485 interface, please refer to the following pin definition to connect the DVR and PTZ. Pin # DVR site PTZ site RS485 TX+ signal RS485 RX+ signal RS485 TX- signal RS485 RX- signal RS485 RX+ signal RS485 TX+ signal RS485 RX- signal...

  • Page 14: Operating The Dvr Unit

    OPERATING THE DVR UNIT CHAPTER Familiarizing the Remote Control Buttons Use the Remote control to operate the OSD menu on surveillance screen. Button Function Press + 0 , the DVR system will instantly playback the recorded file that is recorded 60 seconds before. In multiple DVR mode, Press + number button(...
  • Page 15 Button Function Set a playing recorded video from A point to B point segment and repeat playing on surveillance (16) screen(See 2.1.1) Fast play the video playback at the speed of 2x, 4x, 8x ,16x, 32x, or 64x When button has pressed, and press can go to next frame To start play recorded file / To enter playback menu (17)

  • Page 16: Using Ab Repeat Function

    2.1.1 Using AB Repeat Function AB Repeat function allow user to set a video segment from A to B point and play on the surveillance screen until user stop. 1. Press to call out the SEARCH MODE menu to find the recorded video that user wants to playback.

  • Page 17: Using Usb Backup Button

    2.1.2 Using USB Backup Button User can press button to backup the AB segment video file. VIDEO BACKUP SETUP START 2009 / 11 / 03 14 : 50 : 10 2009 / 11 / 03 14 : 52 : 10 BACKUP CH BACKUP SIZE ~4 MB...
  • Page 18 4. The selected file will be playback on AVF Player UI.

  • Page 19: Controlling Ptz Camera

    2.1.3 Controlling PTZ Camera Using remote control, user can easily control PTZ camera at local site. Before starting, make sure the PTZ camera is connected with the DVR unit and PTZ function is enabled(see also PTZ Setup Chapter 3.1). 2.1.3.1 To Enter the PTZ Mode To control PTZ camera, user need to enter the PTZ mode first.

  • Page 20: Controlling The Ptz Camera

    2.1.3.3 Controlling the PTZ Camera To move, adjust focus, and zoom in/out camera lens can be done by using some function buttons on the remote control. To move the PTZ camera lens to the right To move the PTZ camera lens to the left To move the PTZ camera lens to go up To move the PTZ camera lens to go down To zoom in PTZ camera...

  • Page 21: Using The Dvr For The First Time

    Using the DVR for the First Time 1. Make sure all devices and power cables are well connected. 2. Turn on the DVR unit by connecting the power cable into the power plug. 3. User should see the SYSTEM INITIALIZE window appear on the surveillance screen. The system will do hard disk detection automatically.

  • Page 22: Surveillance Screen Introduction

    Surveillance Screen Introduction This chapter will describe the symbols on the surveillance screen and screen display mode. While DVR is playback, the record action will keep working and the surveillance screen is playback the recorded video. Surveillance Screen Preview Mode Symbol Description DVR is recording...
  • Page 23 Playback Mode Symbol Description Playback the recorded video Go back to the last frame button is pressed Go to next frame button is pressed ∥ The pause the playing button is pressed Audio is enabled AB segment is set and playing Recorded video is playback at backward speed(2x, 4x, 8x, 16x, 32x, or 64x) Recorded video is playback at faster forward speed(2x, 4x, 8x, 16x, 32x, or 64x) Always Recording...

  • Page 24: Setup The Time Stamp

    2.3.1 Setup the Time Stamp By enabling TIME STAMP function, current date and time will be displayed on each channel screen to verify the recording date and time. Please follow the below steps to enable TIME STAMP. 1. Press to call out OSD menu. 2.

  • Page 25: Playback The Video

    2.3.2 Playback the Video If the unit is recording the video, user don’t have to stop video recording. SEARCH METHOD 1. Press (play). TIME SEARCH FILE LIST SMART MOTION SEARCH 2. Use the buttons to go up and down and select TIME SEARCH, FILE LIST, or SMART MOTION SEARCH.
  • Page 26 4. And then, select SEARCH AREA to mark an area to search. Use , and to move the block and press to confirm. To exit, press 5. To start searching, select the SEARCH EXECUTION. 6. After make a selection, the DVR system will start playback automatically.

  • Page 27: Osd Navigation Tree

    OSD NAVIGATION TREE CHAPTER The following figure is an OSD menu tree map. To call out the OSD menu, press on the remote control.

  • Page 30: Menu Function

    Menu Function Use remote control to navigate in the OSD menu. The red frame turns yellow when you are making a selection. Each time you change the video display output or video system (NTSC/PAL), the power must be turned off and on to reset the DVR unit. OSD MENU Description MAIN MENU...
  • Page 31 OSD MENU Description CHANNEL SETTING SETUP CHANNEL SETTING ENABLE Configure the parameters of each channel. RECORD AUDIO RECORD ENABLE PREVIEW ENCRYPTION Enable/disable the channel to display the video on the surveillance screen. If the channel is disabled, there won’t be any video display and recording. MAX.
  • Page 32 OSD MENU Description PTZ SETUP PTZ SETUP To enable PTZ camera control by remote control and setup PTZ camera ENABLE parameters. PROTOCOL PELCO-D BAUD RATE 9600 AUTO PAN ENABLE DWELL TIME 010S 010S 010S 010S Select the channel of PTZ camera. If the PTZ camera is connecting on channel 1, then select the camera 1 for PTZ video to be display on channel Assign an ID to PTZ camera.
  • Page 33 OSD MENU Description DISPLAY SETUP VIDEO OUT SETTING COLOR ADJUSTMENT To select the sharpness, color enhancement, VGA mode, resolution of VGA VIDEO OUT SETTING VIDEO SHIELD and TV out setting. VGA - TV SELECTION MAIN - MAIN SPOT MONITOR QUAD VIDEO OUT SETUP EVENT DURATION ADJUSTABLE...
  • Page 34 OSD MENU Description DISPLAY SETUP VGA - TV SELECTION COLOR ADJUSTMENT Select the VGA and TV output order. VIDEO OUT SETTING VIDEO SHIELD MAIN - MAIN: Both VGA and TV output surveillance video on screen. VGA - TV SELECTION MAIN - MAIN SPOT MONITOR QUAD MAIN –...
  • Page 35 OSD MENU Description MAIN MENU RECORD SCHEDULE CAMERA/RECORD By default, in 24 hours, the recording schedule is set to always record every DISPLAY SCHEDULE hour. Refer to the table below to customize the recording condition. EVENT SETUP STORAGE Condition Description NETWORK NO RECORD Not recording at all.
  • Page 36 OSD MENU Description EVENT SETUP ALARM SETTING ALARM SETTING Configure parameters of alarm. SENSOR SETTING MOTION DETECTION ALARM SETUP ALARM TYPE RECORD ALARM CONTINUOUSLY ALARM PERIOD 005 SEC SELECT / DESELECT ALL SENSOR MOTION DETECTION VIDEO LOSS REMOTE TRIGGER HDD FAIL ALARM TYPE Select the way of alarming –...
  • Page 37 OSD MENU Description SENSOR SETUP SENSOR SENSOR1 SENSOR2 SENSOR3 SENSOR4 ENABLE Customize the initial state of the attached sensor. TYPE ENABLE Active/deactivate the sensor. TYPE Select the state of the sensor. NO: Indicates that the initial state of the sensor is normal open. Video recording initiates when there is a changes in the sensor state NC: Indicates that the initial state of the sensor is normal close.
  • Page 38 OSD MENU Description STORAGE SETUP HDD OVERWRITE HDD OVERWRITE HDD SIZE 953 , 849MB Enable/disable replacing the earliest recorded file when the hard disk space HDD USED 279MB runs out. By default, the HDD overwrite setting is enabled. If user has HDD FORMAT VIDEO BACKUP enable the PASSWORD SETUP in SYSTEM SETUP, and then, a...
  • Page 39 OSD MENU Description STORAGE SETUP VIDEO BACKUP HDD OVERWRITE HDD SIZE 953 , 849MB To backup the recorded video by selected period. HDD USED 279MB HDD FORMAT VIDEO BACKUP SETUP VIDEO BACKUP START 2009 / 11 / 03 14 : 50 : 10 2009 / 11 / 03 14 : 52 : 10 BACKUP CH BACKUP SIZE...
  • Page 40 OSD MENU Description MAIN MENU NETWORK SETUP CAMERA/RECORD Setup the network parameters for the internet or intranet remote monitor or DISPLAY SCHEDULE playback. EVENT SETUP STORAGE NETWORK SETUP NETWORK IP MODE STATIC SYSTEM VIDEO PORT 0080 UPGRADE PORT 5005 STREAM SETUP IP MODE The system provides 3 types of IP setup mode –...
  • Page 41 OSD MENU Description NETWORK SETUP UPGRADE PORT: IP MODE STATIC VIDEO PORT 0080 A port for the remote update DVR system firmware. Any port can be UPGRADE PORT 5005 assigned as an upgrade port, except the ports are already used by the STREAM SETUP network services.
  • Page 42 OSD MENU Description SYSTEM SETUP CONFIGURATION SYSTEM INFO CONFIGURATION Backup and restore the DVR system setting. CONFIGURATION SETUP DATE / TIME PASSWORD CHANGE LOAD SYSTEM DEFAULT AUDIO SETUP EXPORT CONFIGURATION MULTIPLE DVR IMPORT CONFIGURATION DVR ID INSTANT PLAYBACK 060 SEC LANGUAGE ENGLISH LOAD SYSTEM DEFAULT...
  • Page 43 OSD MENU Description SYSTEM SETUP DATE FORMAT SYSTEM INFO Select the display format of the date -- YYYY/MM/DD, MM/DD/YYYY, or CONFIGURATION DD/MM/YYYY DATE / TIME DATE / TIME SETUP PASSWORD CHANGE AUDIO SETUP DATE FORMAT YYYY/MM/DD MULTIPLE DVR DATE 2009 / 11 / 03 DVR ID TIME 15 : 19 : 09...
  • Page 44 OSD MENU Description SYSTEM SETUP PASSWORD CHANGE SYSTEM INFO CONFIGURATION PASSWORD CHANGE SETUP PASSWORD SETUP DATE / TIME ADMINISTRATOR PASSWORD CHANGE OPERATOR AUDIO SETUP USER MULTIPLE DVR DVR ID INSTANT PLAYBACK 060 SEC LANGUAGE ENGLISH PASSWORD SETUP Enable/disable full system password protection. This would prevent unauthorized user to stop video recording, change system settings and formatting the hard disk.
  • Page 45 OSD MENU Description SYSTEM SETUP AUDIO SETUP SYSTEM INFO CONFIGURATION AUDIO SETUP MUTE DATE / TIME AUDIO OUT @ QUAD PASSWORD CHANGE VOLUME ADJUSTMENT AUDIO SETUP RESET TO DEFAULT MULTIPLE DVR DVR ID INSTANT PLAYBACK 060 SEC LANGUAGE ENGLISH MUTE Enable/disable to hear audio sound while preview or playback.

  • Page 46: Using The Usb Playback Console

    USING THE USB PLAYBACK CONSOLE CHAPTER Recommended System Requirements Pentium®4 2.4GHZ or above Windows®2000/ Windows XP/Windows Vista/Windows 7 DDR 256 MB Graphic function must support DirectDraw Audio card or built-in Speaker 1 available USB2.0 port Installing the USB Playback Console To install the USB Playback Console: Place Installation CD into the CD-ROM drive.

  • Page 47: Running The Usb Playback Console

    Running the USB Playback Console To run the application, click the icon on the PC desktop Name Function Exit To close the application. (2) Progress bar Show the progress of the file being played. You may move the bar to seek at any location of the track.
  • Page 48 Name Function (4) Open File To select the video file source for playing. - DVR Recorded File (HD): To playback the recorded video from the hard disk which was recording video on the DVR system. (see aslo Chapter 4.3.2) - Backup File(.dvr): The file is backup and save in *.dvr file format. (see also Chapter 4.3.3) - Backup File (.avf): The file is backup and save to external USB storage device in *.avf...

  • Page 49: To Cut And Save The Portion Of The Recorded Video

    Name Function When playback file from hard disk and *.avf file, click watermark to call out (15) Watermark ImageVerification application (see also Chapter (16) Split Screen Mode Select from different screen view to playback the recorded video file of the entire camera or one camera on screen.

  • Page 50: Playback Backup File(*.Dvr)

    4.3.3 Playback Backup File(*.dvr) Click Open File button. Select Backup File(*.dvr) and click OK. Locate the backup file folder and click OK. When open the backup video file, just locate the where backup file folder is. And then, Playback Date/Time Selection window appears. Select the date and time and click OK.

  • Page 51: Backup Recorded Video File

    BACKUP RECORDED VIDEO FILE CHAPTER HDD Backup application provides user an interface to view recorded video from hard disk and backup Familiarizing with HDD Backup Application Name Function Date Select the date for events Hour and Channel User can select the hour and channel for events. : All events in this hour and channel have been selected.

  • Page 52: To Backup Recorded Video File

    Name Function Source Disk To select the hard disk drive (10) Target Path To locate on where user wants to save the file (11) Event (%) Display the backup progress rate of event in percentage (12) Total (%) Display the total backup progress rate in percentage (13) Stop Stop backup progress (14) Start...

  • Page 53: Chapter 6 Ienhance

    IENHANCE CHAPTER The bundled iEnhance is a video editing tool and can only be used with *.dvr and *.avf video file. It allows you to adjust the video picture quality, segment and save the selected portion of the video, zoom in and out the image, and print or save the screen shot. You can also save the setting and apply it on other files.

  • Page 54: To Use Istable

    Name Function (11) Undo Delete the last action. (12) Noise Reduce Adjust the softness and repair the damaged colours. (13) Sharpness Improve the overall image by enhancing edges. This gives the image more depth. (14) Effects Gray Scale: convert the image into black and white (monochrome). Normalize: adjust the brightness intensity.

  • Page 55: Chapter 7 Imageverification

    IMAGEVERIFICATION CHAPTER Image Verification is a watermark-checking program to identify the authenticity of a saved image (e.g. by snapshot). This program can only verify uncompressed bmp image files. To Run the ImageVerification To run the ImageVerification application, click the Watermark button on USB Playback Application main interface.

  • Page 56: Using The Remote Programs

    USING THE REMOTE PROGRAMS CHAPTER User can use Microsoft Internet Explorer to access DVR system by entering the IP address. To use this feature, make sure that your PC and DVR server both are connected to the internet and the Network feature is enabled.
  • Page 57 After installing the WebCamX.cab and when connecting to the DVR system, you are required to enter default account ID (default is ADMIN) and password (default is 111111) and select the type of network. Changing account password is strongly recommended.

  • Page 58: Familiarizing The Webviewer Buttons

    Familiarizing the WebViewer Buttons Right-clicking on the WebViewer video screen, enables you to start video recording, switch camera and enable/disable DirectDraw. Name Function (1) DirectDraw Enhance the video quality. Not all graphic cards can support this function. If you cannot see the screen display correctly or screen is messed, please check with VGA card vendor.
  • Page 59 Name Function (13) Select cameras to Select to the view camera from different server. In Select Camera dialog box, Display view column, click to enable/disable viewing the camera. Click Add Server and select the server type between DVR and IP Cam to add. Click Delete Server to delete the selected item.

  • Page 60: To Setup Remote System Setting

    8.1.1 To Setup Remote System Setting Click OK to exit and save the setting and Cancel to exit without saving the setting. The setting here applies to Remote DVR system only. After changed the DVR system setting, refresh your web browser in order to apply the new setting to the DVR system.

  • Page 61: Camera Setup

    - Time Format: Select the format of time and date for the DVR system. - Disk Overwrite: Enable/disable replacing the earliest record when the hard disk space runs out. By default, the HDD overwrite setting is enabled (4) Display - VGA-TV Selection: Select the VGA and TV output order. MAIN - MAIN: Both VGA and TV output surveillance video on screen.
  • Page 62 (4) Audio Setting Click Reset to Default Value to set all video setting back to the default. - Audio Out @ Quad Select the channel to output the audio signal While QUAD mode. Please make sure the audio output device (such as a speaker) is connected to DVR unit. - Audio Mute Enable/disable to hear audio sound while playback.

  • Page 63: Record Setup

    8.1.1.3 Record Setup (1) Record Mode Select D1/CIF/D1 Enhance recording mode. Under D1 mode, the total recording frame rate is 60/50fps (NTSC/PAL). The video recording is in full screen resolution and takes turns from one channel to the next one when Auto Scan enables. Each channel is recorded only at a maximum frame rate of 30/25 fps (NTSC/PAL).
  • Page 64 - Max. FPS Display the maximum frame rate of recording that user has set. Maximum fps total value depends on the RESOLUTION that user has chosen. - FPS Set the number of frames per second to be recorded. The higher the frame rate, it uses more hard disk space.

  • Page 65: Alarm Setup

    8.1.1.4 Alarm Setup (1) Alarm Type Select the way of alarming – Record, EMAIL, or RELAY. (2) Alarm Continuously Enable/disable to execute the alarm action (ALARM TYPE) continuously when alarm has been trigger. The alarm action is according to the setting of ALARM TYPE that user has setup. When ALARM CONTINUOUSLY has been started, it won’t be stop until the recording has been stop manually.
  • Page 66 - Mall Setup SMTP: Enter the SMTP server User ID & Password: Enter User ID and Password for e-mail server user identification From: Enter the sender e-mail address To: The recipient e-mail address and separate it with a semicolon Subject: Enter the message title Message: Type the message (5) Sensor Enable/disable initial state of the attached sensor of the channel.

  • Page 67: Network Setup

    8.1.1.5 Network Setup (1) IP Mode The system provides 3 types of IP setup mode – STATIC, DHCP, and PPPOE. STATIC: Assigns a constant IP address for the DVR system. DHCP: Assign the IP address by local DHCP server to DVR system. The DHCP (Dynamic Host Configuration Protocol) is a set of rules used by a communications device (such as a computer, router or networking adaptor) to allow the device to request and get an Internet address from a server which has a list of addresses available for assignment...

  • Page 68: User Setup

    Set the stream FPS of channel. Scroll the bar to adjust the fps. Quality Select the quality of the channel. 8.1.1.6 User Setup To change Admin, operator, and user account’s password. Enter the new password in Password and re-enter again in Password Confirm. Click OK to complete the change.

  • Page 69: Familiarizing The Webviewer Ptz Buttons

    Familiarizing the WebViewer PTZ Buttons Name Function (1) Direction buttons Adjust and position the focal point of the PTZ camera. Click the center to pan automatically. (2) Zoom +/- Zoom in and out the image. (3) Select PTZ Choose to enable/disable the PTZ camera. In the Select PTZ dialog box, Select column, click to enable/disable viewing and controlling the PTZ camera.

  • Page 70: Familiarizing The Remote Console Buttons

    Familiarizing the Remote Console Buttons Name Function (1) Exit Close/minimize remote console application (2) Split Screen Mode Select from 2 different split screen type to playback the recorded video file of all the cameras or one camera on the screen. (3) Record Start/stop video recording.

  • Page 71: To Setup Remote Console Setting

    8.3.1 To Setup Remote Console Setting Click Setup button to call out the System Setting windows. Click OK to exit and save the setting and Cancel to exit without saving the setting. (1) Storage Path Set the directory on where to save the data. When there is not enough free space to record one hour data, the system automatically replaces the oldest data.

  • Page 72: Using The Remote Playback

    Using the Remote Playback To use this feature, first switch to playback mode by clicking the Playback icon, and then, select the source of the file. In the Select Playback Mode dialog box, choose Local Playback to open the file that is recorded in the Remote Console, and Remote Playback to open the file that is recorded on the DVR server.

  • Page 74: Familiarizing The Local Playback Buttons

    8.4.1 Familiarizing the Local Playback Buttons Name Function (1) Exit Click to exit or minimize the application. The password is required for exit or minimize. Show the progress of the file being played. You may move the bar to seek at any location of (2) Progress bar the track.
  • Page 75 Name Function Select the date on the calendar and the time from 00 to 23 to where to start playing the (6) Archive recorded video file. - Also, user can open the recorded file from certain location by click OPEN FILE button - Channel 01~ 16 and Channel 17 ~ 32: Click the button to switch to different channel group of playback calendar if the DVR has more than 16 channels.

  • Page 76: To Cut And Save The Wanted Portion Of The Recorded Video

    8.4.1.1 To Cut and Save the Wanted Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where you want to start the cut. Then, click Segment to set the begin mark. 2.

  • Page 77: To Search Using The Visual Search

    8.4.1.2 To Search Using the Visual Search 1. Click Visual Search. 2. In the Visual Search Setting dialog box, select the Camera number and the date. Then click OK. 3. When a series of frames appear by date, click on the frame to display another series of frames and search by every Hour of that date, every Minutes of that hour, every 10 Seconds of that minute, every Second of that 10 seconds.

  • Page 78: To Search Using The Intelligent Search

    8.4.1.3 To Search Using the Intelligent Search 1. Click on the video screen on where you want to search. 2. Click Intelligent Search. The Intelligent Search text (red) would appear at the lower left corner of the screen. 3. When the Intelligent Search Setting dialog box and motion detector frame appear, you may adjust the sensitivity bar and the motion detector frame size and location.

  • Page 79: Familiarizing The Download And Playback Buttons

    8.4.2 Familiarizing the Download and Playback Buttons Name Function (1) Exit Click to close the application. (2) Progress bar Show the progress of the file being played. You may move the bar to seek at any location of the track. (3) Playback Begin: Move at the beginning of the recorded video file.
  • Page 80 Name Function When playback file from hard disk and *.avf file, click watermark to call out ImageVerification (12) Watermark application(see also Chapter Watermark verification doesn’t support on hardware compression products, EB series DVR, and video that is recorded from IP camera.

  • Page 81: Using Handyviewer And Javaviewer

    USING HANDYVIEWER AND JAVAVIEWER CHAPTER Users can use a mobile phone to access the DVR through Internet. Make sure your mobile phone support IE browser and is connected to the internet. To access the DVR server, open IE browser and enter http://DVR IP/mobile.

  • Page 82: To Install Pdaviewer From The Internet

    9.1.2 To install PDAViewer from the Internet 1. Make sure you are connected to the internet. 2. Open the web browser and enter the server IP. Then click the hyperlink Download PDAViewer. 3. When the Download dialog box appears, enable Open file after download and click Yes.

  • Page 83: To Use The Pdaviewer

    9.1.3 To Use the PDAViewer 1. Run the PDAViewer on your PDA. 2. Familiarizing the PDAViewer buttons. (10) Name Function (1) Connect Hook up to the DVR server. Make sure you are connected to internet. When the iView screen appears, click Add to add DVR server. Enter the server IP, port, user ID, password and select the connection type.

  • Page 84: To Playback In Pdaviewer

    Name Function (10) Direction buttons Adjust and position the focal point of the PTZ camera. To change the video quality, enable/disable audio, and select to display different camera, tap on the video screen longer the popup menu will appear. 9.1.4 To Playback in PDAViewer Run the PDAViewer in the Programs.
  • Page 85 10. The sensor and relay devices will list as below: 11. User can change the relay status. Select the relay and tap on video screen longer the popup menu will appear, and then, select the status (ON, OFF, Tigger)

  • Page 86: Using Javaviewer To Access Dvr Server

    Using JavaViewer to Access DVR Server Using the mobile phone within Symbian Smart Phone OS to access the DVR through Internet. Make sure your mobile phone supports Symbian Smart Phone OS and can be connected to the internet. To use this feature, you need to install the JAVA Viewer program that it can be downloading it from the DVR server through the internet.
  • Page 87 7. The JAVAViewer support PTZ control function, you can refer to Help file for detail function control key. Select menu and go the way down to select the Help file. →...

  • Page 88: Warranty Notice

    Any other cause which does not relate to a product defect 3. Cartons, cases, batteries, cabinets, tapes, or accessories used with product 4. AVerMedia does not warrant that this product will meet your requirements; it is your responsibility to determine the suitability of this product for your purpose WHAT WE WILL AND WILL NOT PAY FOR We will pay labor and material expenses for covered items.

Table of Contents