1. About the Hotwire 8774 Termination Unit
User Interface Types
There are two types of user interfaces to the termination unit:
T
T
SNMP Management Capabilities
The termination unit supports SNMP Version 1, and can be managed by any
industry-standard SNMP manager and accessed using SNMP by external
SNMP managers.
Management Information Base (MIB) Support
For a detailed description of supported MIBs, visit Paradyne's Web site at
www.paradyne.com. The following MIBs are supported:
T
T
T
T
DSX-1
Router
1-4
Menu-driven asynchronous terminal interface screens. See
the Asynchronous Terminal Interface
Front panel LED status indicators. See
MIB II (RFC 1213 and RFC 1573) – Defines the general objects for use with a
network management protocol in TCP/IP internets and provides general
information about the unit. MIB II is backward-compatible with MIB I.
DS1/E1 MIB (RFC 1406) – Reports the performance status of the DSX-1
interface and supports the features found on the DSX-1 Performance Statistics
screen.
RS-232-Like MIB (RFC 1659) – Defines objects for managing RS-232-type
interfaces (e.g., V.35, RS-422, RS-423, etc.) and supports the synchronous
data port on the DSU.
Enterprise MIB – Supports configuration, status, statistics, and tests.
TDM SDSL
AC
T5A
250V
48V
RTN
A B
A
B
EOC
AC
INPUT
48VDC CLASS 2 OR
LIMITED PWR SOURCE
7974
8600 Series
DSLAM
February 2001
.
Chapter 4, Monitoring the Unit
Operation, Maintenance
and Provisioning Center
Network
8774
SNMP NMS
3
2
1
DC FUSES
T4A, MIN. 48V
FAN
DC PWR
4
5
6
.
3
.
2
1
.
.
ALM
A
B
A
B
STACK
IN
OUT
SERIAL
MCC
1
2
3
POSITION
Ethernet
Interface
Ethernet
LAN
Chapter 2, Using
.
Data
01-16114-03
8774-A2-GB20-40