Failing In Loading Films - FujiFilm Drypix 5000 Operation Manual

Troubleshooting

5.5 Failing in Loading Films

For a failure in film replenishment, countermeasures to be taken will differ case by case.
Follow the procedures shown below and load films again.
5.5.1 When the tray was closed without placing a new film pack:
[Fig. 5.36]
[Fig. 5.36] will appear.
The film tray has not been locked. Pull out the tray and place a new film pack.
To suspend film replenishment, press the
again.
5.5.2 When the tray with a new film pack was closed without tearing off the label:
[Fig. 5.36] will appear.
As the film tray has not been locked, pull out the tray.
Redo the film replenishment operation.
[Fig. 5.37]
To suspend film replenishment, press the
again.
5-30
button and open/close the tray
Use the DI-HL, DI-HLc, or DI-ML
film. (The arrow mark is printed
on the red background.
For the DI-ML film, it is printed
on the green background.)
Images cannot be recorded
correctly if films such as
DI-AL, etc. are used.
button and open/close the tray
006-240-40 2006.09