Loading Paper - FujiFilm ApeosPro C810 Reference Manual

3
Basic Operations of the
Machine
3.1

Loading Paper

After loading paper, configure the Paper Tray settings on the Home screen.
Important
Do not place paper or other objects in the reserved space of the tray. It may cause paper jams or machine
malfunction.
Note
While the printer is processing a job, do not remove the Paper Tray used for the job.

Before loading the paper into the Paper Tray, fan a stack of paper well. This will separate the sheets, and

it can prevent paper jamming.
It is recommended to use our recommended papers. Print may not be done correctly according to the use

conditions.
Refer
For details, refer to "Setup" in "Reference Guide - Operations".
Paper Trays 1, 2
The paper feeding method is the same for Paper Trays 1 (top tray) through 2 (second tray).
The bottom face of loaded paper is the surface printed on.
Loadable
Paper size (mm)
Paper weight
2
(g/m )
Maximum number of sheets
(sheets) (80 g/m
1.
Pull out the Paper Tray until it stops.
2.
When paper is already loaded in the tray, take out the paper.
Standard Max A3, 11 x 17", Min A5
size
Custom size 100 x 148 mm to 330 x 488 mm
Single side 52 to 300
printing
520 x 2 Trays
2
paper)
3.1 Loading Paper
13