FujiFilm Drypix 5000 Operation Manual page 51

Utility Operation
8 When test pattern film is output after a while, make sure that image has been printed
correctly.
[Fig. 4.18] Standard Test Pattern (SMPTE) - Example: For an output image
30%
20%
10%
0%
When the Service Setting has been performed, a user-defined test pattern can be selected.
From the Test Pattern screen, select the "User Settable".
Then, follow the same operation procedures as for the SMPTE pattern.
[Fig. 4.19.1]
When the Service Setting has been performed, a test pattern to be used for confirmation of
the resolution can be selected.
From the Test Pattern screen, select the "Spatial Resolution".
Printout will then start after Dmax is selected.
[Fig. 4.19.2]
006-240-60 2007.03
40% 50% 50% 60%
70%
80%
90%
0/ 95/
100%
5% 100%
SMPTE TEST PATTERN
REV. 10 / 6 / 83 © 1983
9 / 6 / 84
Select.
Select.
1
2
3
4
5
6
7
4-11