Hardware Configuration; Drypix 5000 Main Unit - FujiFilm Drypix 5000 Operation Manual

System Overview

2.2 Hardware Configuration

[1] DRYPIX 5000 Main Unit

[Fig. 2.2] DRYPIX 5000 Main Unit
[Table 2-1] Component Names and Functions
Name
Main Unit Operation Panel See pages 2-5 and 2-6 for details.
Output Film Tray
Tray 1
Tray 2 (option)
Tray 3 (option)
Front Cover
Film Jam Clear Cover
Main Power Switch
006-240-20 2004.03
Main Unit Operation Panel
Output Film Tray
Front
Function
Ejected output films are stacked in this tray.
A maximum of 150 films can be stacked here.
Film supply tray provided as a standard.
Optional film supply tray.
* Depending on the equipment specification, Tray 2 is provided as a standard.
Another optional film supply tray.
* Depending on the equipment specification, Tray 3 is provided as a standard.
Never open the Front Cover while in routine processing status.
Open this cover only when a film jam occurs inside the unit, and take
appropriate countermeasures for correcting film jamming.
See Chapter 5, Troubleshooting for details.
Never open the Film Jam Clear Cover while in routine processing status.
Open this cover only when a film jam occurs inside the unit, and take
appropriate countermeasures for correcting film jamming.
See Chapter 5, Troubleshooting for details.
Leave this switch turned ON ( | ).
Film Jam Clear Cover
Front Cover
Tray 1
Tray 2 (option)*
Tray 3 (option)*
Main Power Switch
1
2
3
4
5
6
7
2-3