Automated F.d.c - FujiFilm Drypix 5000 Operation Manual

Utility Operation

4.10 Automated F.D.C.

Use this function to set the timing for achieving automatic film density calibration when supplying
a new film pack.
The operation procedure is as follows.
1 Start up the Utility. (Refer to section 4.2.1.)
2 Press the
[Fig. 4.59]
3 A screen for selection will appear. Select any for When Execute? and press the
button. The quit window will then open. Press the
[Fig. 4.60]
• By each film pack:
Performs automatic film density calibration every time when a film pack is supplied.
• By each film lot No.:
Performs automatic film density calibration every time when a film lot number is changed.
A slight difference may result in the density due to differences in sensitivity among film lots.
006-240-30 2006.05
button on the Utility initial screen (2/3).
button.
1
2
3
4
5
6
7
4-37