Economy Mode - FujiFilm Drypix 5000 Operation Manual

Utility Operation
4.8

Economy Mode

Economy Mode that consists of the following three patterns is available for saving power
consumption by the equipment.
Screen Saver
Puts off the backlight of the screen and turns the screen OFF.
This mode pattern becomes available around-the-clock if you input a specific time period on the
"Transition Time" screen.
Stand-By
Erases the display, saves the heater power consumption and turns the motor OFF for power
conservation purposes.
(It will take about 10 minutes to return to a condition where film output becomes possible again
after the system has been restored from this mode pattern.)
To activate this mode pattern, input a specific time period on the "Transition Time" screen and
then perform necessary settings for "Scheduler" or "Calendar".
Sleep
Power conservation effect enhanced further than the Stand-By mode pattern can be obtained.
(It will take about 20 minutes to return to a condition where film output becomes possible again
after the system has been restored from this mode pattern.)
To activate this mode pattern, input a specific time period on the "Transition Time" screen and
then perform necessary settings for "Scheduler" or "Calendar".
➜ For details of the Transition Time mode, see "4.8.1 Transition Time".
➜ For details of the Scheduler mode, see "4.8.2 Scheduler".
➜ For details of the Calendar mode, see "4.8.3 Calendar".
If the operation panel is not touched or no data comes from the outside even after a
specific time period preset has passed, the system will enter any of the three mode pat-
terns above automatically.
Furthermore, in the Stand-By or Sleep mode pattern, you can determine an available time
range as follows.
• Scheduler:
• Calendar:
• Save Power: The "Save Power" function, which moves into Economy Mode immediately after
Restoring from the Economy Mode
To restore routine status back from the Economy Mode, touch the operation panel or transmit any
image data from an external device.
4-20
Determines on a weekly basis a time range available for power conservation
purposes. (See section 4.8.2.)
Determines office closing days.
The following three setting modes, "Closing all day", "Closing afternoon", and
"Closing morning", are available for each day starting from the date on which
such a setting is performed until after one year. It is also possible to set up a time
range for power conservation purposes in all of the "Closing all day", "Closing
afternoon", and "Closing morning" modes for each office closing day.
(See section 4.8.3.)
starting the operation, is also available. (See section 4.8.4.)
If this function is performed, the system proceeds immediately to Economy Mode,
which requires a relatively long time for you to return to the condition where film
output is possible. For this reason, pay due attention when performing this function.
006-240-20 2004.03