FujiFilm Drypix 5000 Operation Manual page 58

Utility Operation
4 Press the
The number of films used since it was cleared off the last and the total number of films
used will be displayed respectively for each tray.
If the
films used for each tray since it was cleared off the last (displayed at the top) will be
cleared off, resetting thus the film count to 0 (zero).
[Fig. 4.32]
5 When the
screen [Fig. 4.32], the following reset confirm screen will be displayed.
If you wish to reset the count to 0 for the selected tray, press the
The display will then return to the previous screen [Fig. 4.32].
Press the
[Fig. 4.33]
4-18
button, and the following screen appears.
button is pressed on the right hand side of the screen, the number of
button for the tray you wish to reset is pressed on the previous
button to return to the Utility initial screen.
button.
006-240-20 2004.03