Calendar - FujiFilm Drypix 5000 Operation Manual

Utility Operation

4.8.3 Calendar

Use the "Calendar" mode function if you wish to save power on office closing days.
By using this mode function, you can set up a time range that enables power conservation
on a daily basis. This setting also belongs to "Time Period Where Economy Mode is
Activated". Combined with the "Scheduler" mode function, you can use Economy Mode in
an effective manner.
The three mode patterns, Closing all day, Closing afternoon and Closing morning, are
available in the Calendar mode. For each mode pattern, it is possible to set up a time
range divided into further detailed ranges. Same as with the "Scheduler" mode function,
Non-economy Operation Mode is restored automatically from Economy Mode.
G Calendar mode settings
Because a time range available for power conservation purposes is to be set up for the
"Scheduler" mode on a weekly basis, it is not possible to set up office closing dates due to
national holidays or other irregular closing days. In such an instance, you can easily
determine a time range for power conservation purposes by using the "Calendar" mode
function.
[Fig. 4.44] Calendar Screen
CAUTION
If Economy Mode has been activated for either "Scheduler" or "Calendar", such mode
becomes effective for the specified time range. To use both the "Scheduler" and
"Calendar" modes at the same time, make sure to check the "Scheduler" screen as
well.
It is possible to set up office closing days one year ahead of time.
After passing the setup date, the "Calendar" mode setting will be canceled
automatically. Perform settings for the following year as necessary.
006-240-20 2004.03
You can perform the following settings.
ALL : Closing all day
PM : Closing afternoon
AM : Closing morning
It is possible set up a time range available
for power conservation purposes,
according to each mode pattern.
(See "G Time of Office Closed mode settings"
described hereafter.)
1
2
3
4
5
6
7
4-27