Starting Up The System - FujiFilm Drypix 5000 Operation Manual

Basic Operation

Starting Up the System

1 Confirm that the Main Power Switch on the bottom front of the equipment has been
turned ON, and the POWER Lamp
[Fig. 3.1] Main Power Switch
2 Press the Power ON Switch on the operation panel.
[Fig. 3.2] Pressing the Power ON Switch
3 When the Power ON Switch is pressed, the initialization process starts. The software
version as well as software ID will then appear on the DRYPIX 5000 main unit display.
When the following right screen is displayed, the system has been started up normally.
[Fig. 3.3] Software Version Displayed
006-240-60 2007.03
on the operation panel lights green.
When the switch is turned to the " I " side,
the Main Power Switch is ON status.
1
2
3
4
5
6
7
3-3