Shutting Down The System - FujiFilm Drypix 5000 Operation Manual

Basic Operation

Shutting Down the System

1 Make sure to confirm that the DRYPIX 5000 main unit has completed image recording
and output processing and is in idle status.
2 Press the
[Fig. 3.8]
3 When a screen appears prompting you to confirm the system shutdown, press
[Fig. 3.9]
If unprocessed films remain in the equipment, a screen like that shown below appears.
Select to press either of
[Fig. 3.10]
3-6
button on the Operation Panel.
Press this button.
button.
When this screen disappears, the system
has been ended normally.
button or button.
If you want to start up the equipment
after pressing the
wait at least 5 seconds* to turn the
power switch ON.
This is to fully reset the equipment's
*
internal conditions.
button,
006-240-20 2004.03