Loading Paper - FujiFilm Tieline Apeos C7070 Reference Manual

3
Basic Operations of the
Machine
3.1

Loading Paper

After loading paper, configure the Paper Tray settings on the Home screen.
Important
Do not place paper or other objects in the reserved space of the tray. It may cause paper jams or machine
malfunction.
Note
While the printer is processing a job, do not remove the Paper Tray used for the job.

Before loading the paper into the Paper Tray, fan a stack of paper well. This will separate the sheets, and

it can prevent paper jamming.
Refer
For details, refer to "Setup" in "Reference Guide - Operations".
Standard Trays
The paper feeding method is the same for Paper Trays 1 (top tray) through 4 (bottom tray).
The top face of loaded paper is the surface printed on.
Loadable
Paper size (mm)
Paper weight
2
(g/m )
Maximum number of sheets
(sheets)(80 g/m
1.
Pull out the Paper Tray until it stops.
2.
When paper is already loaded in the tray, take out the paper.
Width 100 to 320 (Tray 1: 297)
Length 148 to 457 (Tray 1: 215)
Single 52 to 300
side
printing
520
2
paper)
C3570/C3070 C7070/C6570/C5570/C4570
100 to 320 (Tray 1: 297)
148 to 457 (Tray 1: 432)
3.1 Loading Paper
13