Table of Contents

Advertisement

Utility Operation

4.13 Reprint

Images stored in the hard disc of the equipment can be reprinted.
To use this function, images on the connected equipment to be stored for reprinting
purpose must be set up in advance at Service setup.
The operation procedure is as follows.
1 Start up the Utility. (Refer to section 4.2.1.)
2 Press the
[Fig. 4.67]
When a connecting device for storing images is not set up, the REPRINT button will not be
displayed.
3 The following Reprint screen will appear. Press the
[Fig. 4.68]
Since the hard disc capacity that can be used for reprinting purpose is limited, the oldest
images will be deleted first. Images taken after the date shown on the screen are available
for reprinting.
006-240-20 2004.03
button on the Utility initial screen (2/3).
button.
1
2
3
4
5
6
7
4-41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents