FujiFilm Drypix 5000 Operation Manual page 127

Regular Care and Maintenance
3 Lower the lever and remove the cleaning roller together with its receive.
[Fig. 6.2] Removing the Cleaning Roller
4 Clean the cleaning roller with water.
Splash water as shown in [Fig. 6.3] and rub the surface gently.
Cleaning the roller with water is to remove dirt or dust adhered to the surface and to restore
the cleaning function. Stubborn dirt that is difficult to be removed by water washing must not
be rubbed roughly. It may cause damage to the roller surface. If white spots appear irregularly
on a film, it is time to replace the cleaning roller with a new one.
Replace the cleaning roller around every 3 years.
[Fig. 6.3] Cleaning the Cleaning Roller with Water
006-240-20 2004.03
When removing the cleaning
roller, hold it with both hands
paying attention not to drop it.
Lever
Remove the cleaning roller while
slightly raising the receive.
Cleaning roller
Receive
Cleaning roller
1
2
3
4
5
6
7
6-3