FujiFilm Drypix 5000 Operation Manual page 62

Utility Operation
4 When a screen like that shown below appears, press the
[Fig. 4.37] Details Screen
5 When the
If the operation panel is not touched or no data comes from the outside exceeding a time
period predetermined on this screen, the system proceeds automatically to the Economy
Mode. The Economy Mode will be performed only when the Transition Time is set up accord-
ingly on this screen.
The Stand-By/Sleep mode pattern will be activated if settings necessary for "Scheduler" or
"Time of Office Closed" are performed accordingly.
Set up the Transition Time and then perform necessary settings for "Scheduler" or "Time of
Office Closed".
[Fig. 4.38] Transition Time Screen
(1) To adjust the time, use the
change.
(2) Press the
(3) If you press the
(4) If you wish to perform settings for "Scheduler" continuously, proceed to
"4.8.2 Scheduler"". To perform settings for "Time of Office Closed", proceed
to "4.8.3 Calendar". If you do not wish to perform settings for either of them, press the
4-22
button is selected, the display changes to the [Fig. 4.38] screen.
button to determine the setup value.
button, the display returns to the [Fig. 4.37] Details Screen.
button on [Fig. 4.37]. You can then return to the [Fig. 4.36] screen.
or button of the mode pattern you wish to
button.
006-240-20 2004.03