Troubleshooting
4 Press the
[Fig. 5.11]
5 Pull out Tray 2 toward you to remove the jammed film.
[Fig. 5.12]
Film jams that can be presumed.
(1) Part of a film remains outside the tray because it was caught between the tray and the
shutter.
(2) A film jams inside the equipment (an area where the tray was in).
(3) No film is found. (When the shutter was inserted, a film was moved back into the tray or
a film jammed in the tray.)
For case (3), reconfirm that there are no films jamming in the tray and then proceed to step
6, same as cases (1) and (2).
006-240-20 2004.03
button.
➜
1
2
3
4
5
6
7
5-11