Chapter 4 Utility Operation; Chapter 5 Troubleshooting - FujiFilm Drypix 5000 Operation Manual

System Overview
[Fig. 2.4] Main Unit Operation Panel (display layout: initial image)
Ready (Green)
No. of Prints
Standby for Output
(Hard Disk Icon)
Film Size Icon
[Table 2-3] Component Names and Functions
Name
Ready (Green)
Title/Message
No. of Remaining Films
No. of Prints Standby
for Output
(Hard Disk Icon)
Film Size Icon
Utility Icon
Operation Icon
Shutdown Icon
2-6
No. of
Remaining Films
Function
Ready condition.
Displays screen titles or messages.
Entering the Utility mode will display UTILITY in this area.
For details, see Chapter 3, Basic Operation and Chapter 4,
Utility Operation.
Displays the number of films remaining in each tray and type of
film.
Displays the number of prints standby for output.
Also displays already-registered print jobs, serving at the
same time as an execution icon (Hard Disk Icon) that implements
deletion, urgent processing or display of detials of such print
jobs. For details, see Chapter 3, Basic Operation 3.3 Urgent
Print / 3.4 Deleting a Print Job / 3.5 Print Job Details.
Displays a film size set up for each tray (1, 2 and 3).
Displays "4.0" when the DI-ML is set up at a maximum density of
4.0. (Maximum density output may differ depending on the setting
performed on the connected modality.)
Both inch system (14×17/10×14) and metric system (35×43/
26×36) are available.
Pressing this icon will enter Utility mode.
For details of Utility mode functions, see
Chapter 4, Utility Operation.
When the system requires any user operation for troubleshooting,
etc., icons available for such purposes will be displayed.
Pressing this icon will start the system shutdown process.
Title/Message
Utility Icon
Operation Icon
Shutdown Icon
006-240-40 2006.09