System Components; Standard Components; Options; Supplies - FujiFilm Drypix 5000 Operation Manual

Specifications

1 System Components

1.1 Standard Components

(1) DRYPIX 5000 main unit
(2) Image buffer memory board 256MB ................................ 1

1.2 Options

Supply film tray, 8"×10" film kit, Add-on memory (256MB), Sorter

1.3 Supplies

Fuji Medical Dry Imaging Film DI-HL (Blue-base), DI-HLC (Clear-base), DI-ML (Blue-base)
Cutter

2 Processing Capacity

Max.: Approx. 180 films (14" × 17") / hour.
Max.: Approx. 240 films (26 × 36cm) / hour.
* Note that the processing capacity in actual operation is dependent on the model and
usage of a connected modality.

3 Applicable Film

Fuji Medical Dry Imaging Film
35.4 × 43.0cm (14"×17") 100 sheets / pack
25.7 × 36.4cm (26×36cm) 150 sheets / pack
25.4 × 30.5cm (10"×12") 150 sheets / pack
20.3 × 25.4cm (8"×10")

4 Recording Pixel Size

100µm (Standard)
50µm (High resolution)

5 CR Image Size Reduction

When you printed a CR Image in real size, printed image size will be almost 100% of
reduction rate.
* At the printout from the modality, the size of image is automatically scaled according to
the print area on the film.

6 Gray Scale

14bits (16384 levels)
7-2
........................................... 1
(One-tray, two-tray and three-tray specification types are available.)
150 sheets / pack
DI-HL DI-HLc
(Blue-base) (Clear-base) (Blue-base)
❍ ❍
❍ ❍
❍ ❍
❍ ❍
DI-ML
✕
❍
❍
❍
006-240-40 2006.09