Cleaning The Cleaning Roller With Water - FujiFilm Drypix 5000 Operation Manual

Regular Care and Maintenance

6.1 Cleaning the Cleaning Roller with Water

We recommend that you wash the cleaning roller with water once every week to secure
print image quality. When white spots or traces of lint appear on the output film, also clean
the cleaning roller with water according to the following procedure.
1 Confirm that Running is not displayed on the operation panel, and then shut down the
system. (Refer to
An error may occur if procedure steps herein are performed without shutting down the
system.
2 Open the front cover.
[ Fig. 6.1 ] Opening the Front Cover
6-2
Shutting Down the System on page 3-6.)
006-240-20 2004.03