Scheduler - FujiFilm Drypix 5000 Operation Manual

Utility Operation

4.8.2 Scheduler

Use the "Scheduler" function to apply Economy Mode at night during weekdays.
This function makes it possible to set up a weekly time period for which Economy Mode is
to be activated. The time period thus set up will be the "Time Period Where Economy
Mode is Activated". Furthermore, determining individually a time period where the system
operates routinely (Non-economy Operation Time Period) and the other time period where
Economy Mode is activated will have the equipment restore the Non-economy operation
condition automatically when it proceeds to the "Non-economy Operation Time Period"
from the "Time Period Where Economy Mode is Activated". If you determine such time
period considering the time when office hours start, the equipment will start running
automatically when the time comes in the morning, making then transition from Economy
Mode to Non-economy Operation Time Period takes place smoothly.
For an example of office hours from 8:00 to 18:00
Outside office hours
Time Period Where
Economy Mode
is Activated
1 Start up the Utility. (Refer to section 4.2.1.)
2 Perform settings necessary for Economy Mode.
Press the
[Fig. 4.39] Utility Initial Screen (1/3)
4-24
8 : 00
Non-economy Operation Time Period
Automatically restored from Economy Mode.
If the operation panel is not touched or no data comes
from the outside over a certain time period, transition
to the Stand-By or Sleep mode pattern takes place.
button on the Utility initial screen (1/3).
Office hours
18 : 00
Outside office hours
Time Period Where
Economy Mode
is Activated
006-240-20 2004.03