Transition Time - FujiFilm Drypix 5000 Operation Manual

Utility Operation

4.8.1 Transition Time

Set a time period in which the system proceeds from the routine status to Economy Mode
as follows.
If the operation panel is not touched or no data comes from the outside exceeding a
predetermined time period, the system proceeds automatically to the Economy Mode.
The Stand-By/Sleep mode pattern will be activated if settings necessary for "Sched-
uler" or "Time of Office Closed" are performed accordingly.
Set up the Transition Time and then perform necessary settings for "Scheduler" or
"Time of Office Closed".
The operation procedure is as follows.
1 Start up the Utility. (Refer to section 4.2.1.)
2 Perform settings necessary for Economy Mode.
Press the
[Fig. 4.35] Utility Initial Screen(1/3)
3 A select screen like that shown below appears. Press the
[Fig. 4.36] Set Economy Mode Screen
006-240-20 2004.03
button on the Utility initial screen (1/3).
1
2
3
4
5
6
7
button.
4-21