Placing The Original; Using The Document Feeder - imagistics DF200 Operating Manual

2-26

5. Placing the Original

Using the Document Feeder

The document feeder automatically feeds original sheets placed on the Document Feed Tray, one by one,
to let the machine scan the data on each original. After the machine completes scanning the data, the
document feeder automatically ejects it onto the Document Exit Tray. To ensure the best performance
and most effective use of the document feeder, use the appropriate type of originals as detailed below.
Use of unsuitable types of originals could result in an original misfeed or a damaged original.
Originals Suitable for the Document Feeder
<Duplexing Document Feeder>
Types of Originals: Sheets (Plain paper)
1-sided Original (weighing 13-1/4 lb to 29-1/4 lb)
2-sided Original (weighing 16 lb to 24 lb)
Mixed Original Detection mode (weighing 16 lb to 24 lb)
Original Size:1-Sided Original, 2-Sided Original mode
: 11×17 L to 5-1/2×8-1/2 L
Mixed Original Detection mode
: 11×17 L to Letter
<Automatic Document Feeder>
Types of Originals: Sheets (Plain paper)
Single feeding: Paper weight 10-3/4 lb to 21-3/4 lb
Multiple feeding: Paper weight 14 lb to 21-3/4 lb
Original Size: 1-Sided Original, 2-Sided Original mode
11×17 L to 5-1/2×8-1/2
Mixed Original Detection mode
11×17 L to 5-1/2×8-1/2 C
Unsuitable Originals
• Typing paper, paraffin paper, and other thin paper
• Card
• Originals greater than 11×17 L or smaller than 5-1/2×8-1/2
• Transparencies, translucent paper
• Wrinkled, dog-eared, curled, or torn originals
• Clipped or stapled originals
• Carbon-backed originals
* For any of these types of originals, raise the document feeder and place the original on the glass to let
the machine scan it. p.2-30