Self-Abbreviated Dialing - imagistics DF200 Operating Manual

8-34
2. Settings for FAX Input

Self-Abbreviated Dialing

When this machine acts as an originating station to perform relay transmissions, the relay station sets an
abbreviated dialing number to send a relay status report back to you. To receive this relay status report,
program your abbreviated dialing number.
* The relay station must program the number of the original station as abbreviated dialing before relay
transmission is carried out. The originating station then programs the same "abbreviated number for the
originating station" registered with the relay station as the local abbreviated dialing number (Self-Abbr.
#). After the relay transmission is complete, the relay station sends the relay status report back to the
destination of the abbreviated number that has been selected by the relay station using the local
abbreviated dialing number.
Programming Self-Abbreviated
Number
1
For how to show the [Self-Abbr. #] key, see
"Selecting FAX Input."
2
Touch [Self-Abbr. #].
3
p.8-9
4016P418CB
Useful Tips
• The same number as the "abbreviated number
for the originating station" registered with the
relay station should be entered.
• The number can range from 000 to 499.
Using the 10-Key Pad, enter the local
abbreviated dialing number and touch
[Enter].
4016P419CA