imagistics DF200 Operating Manual page 88

3-22
4. Selecting the Finishing Function
Staple
<When Finisher 9747 is mounted>
1
Touch the desired finishing function key.
2
Touch the stapling key of your choice.
You have a choice of the following two stapling
types:
• Corner Staple
Paper size : 11×17 L to Letter
Type of paper : Plain paper,
A
recycled paper
Number of sheets : 2 to 50
4015O001AA
• 2-Point Staple
Paper size : 11×17 L to Letter
Type of paper : Plain paper,
A
Number of sheets : 2 to 50
4002O068AA
* When you touch a stapling key in the Non-
Sort mode, the Finisher is automatically set
into the Sort mode.
3
4017P029EA
4
4017P030EA
5
NOTES
• Stapling is not possible in the Interrupt mode.
• Check the correct direction of the originals
when making copies in the Staple mode.
• Stapling position cannot be specified if Corner
Staple is selected. It can, however, be specified
if Corner Staple is combined with Hole Punch.
recycled paper
• If an original is placed directly on the Original
Glass in the Staple mode, Separate Scan is
automatically set. p.3-61
• Make sure that the maximum number of sheets
to be stapled together is not exceeded when
making copies in the Staple mode.
Touch [Select Position].
Touch the desired stapling type.
Touch [Enter].
p.3-26
4017P031EA
4016P032CA