Settings For Facsimile Programs - imagistics DF200 Operating Manual

Settings for Facsimile Programs

If you program in advance the various functions that can be used for facsimile transmission together with
the information on a specific destination in one key, you have only to touch that key to start transmission
without having to set communications functions each time.
This is useful when documents are routinely sent to the same destination every day.
Up to 30 facsimile program keys can be used. The total of facsimile program keys and one-touch keys
cannot, however, exceed 300. A facsimile program key name can consist of up to 12 characters.
* The destinations for facsimile programs must be preprogrammed in one-touch dialing or as abbreviated
dialing before attempting to set up programs for them.
Index Key
TX
The functions to be programmed include Image
Quality, Contrast, Reduction, Serial Broadcast
Transmission, Real Time Transmission, Priority
Transmission, Timer Transmission, TSI,
Destination Insertion, Transmission Report,
Remote Copy, Password Transmission, 2in1
Transmission, 2-Sided Transmission, and TX
Marker.
Polling RX
The time for polling reception can be
programmed.
2. Settings for FAX Input
p.8-10, 8-16
Facsimile programs share
these keys with one-touch
dialing keys.
4016P251CA
Batch
Transmission of multiple documents at a
predetermined time can be programmed.
Relay TX
A program can be set up in which a document is
temporarily transmitted to another fax machine,
which in turn transmits the document to multiple
fax machines.
8-23